How We Work

A product's quality is set not at the last step but by the choice at the very start. That is why the process begins by setting aside pine logs with straight, healthy trunks. Trunks that are crooked, cracked or show signs of rot are not chosen for pole or support work.

From trunk to product

The chosen log is debarked and the trunk cleaned. Trunks that will become poles are cut to the length of their class, and logs that will become timber are sawn to the sections in the order list. The sizes are given at this stage, so no new cuts are needed after treatment and no unprotected face is left.

From protection to loading

Products for outdoor use are impregnated by vacuum and pressure and then rested in stacks. Before loading, every load is counted against the order list and its classes and sizes are checked; the products are tied onto the truck or into the container so they cannot shift during the journey.

Grounds and certificates

Production takes place on 1,500 m² of covered and 15,000 m² of open area in Akdağmadeni: sawing and preparation under cover, stacking and loading outside. The process runs under ISO 9001 quality, ISO 14001 environment and ISO 45001 occupational health and safety management systems; the poles carry the TSE certificate for TS EN 14229.

What comes with each load

Every load sets off with a list of the products inside: length and class for poles, section and length for timber, length and diameter for stakes, and the quantity of each. For treated products the treatment details are added to this list. On delivery, comparing the list with the load is all you need; if you see a mismatch, reporting it with the load number lets it be solved quickly.